![National Instruments GPIB PCI-GPIB Скачать руководство пользователя страница 19](http://html1.mh-extra.com/html/national-instruments/gpib-pci-gpib/gpib-pci-gpib_getting-started_3514503019.webp)
Chapter 4
Verify the Installation
PCI-GPIB for Solaris 2
4-2
© National Instruments Corporation
Complete the following steps to verify the software installation:
1.
Run
ibtsta
by entering the following command:
ibtsta
2.
If
ibtsta
completes with no errors and a bus analyzer is available,
connect the bus analyzer to the GPIB board, then run
ibtstb
by
entering the following command:
ibtstb
If no error occurs, the NI-488.2M driver is installed correctly. If an error
occurs, refer to the next section for troubleshooting information.
Troubleshooting Error Messages
If
ibtsta
fails, the program generates common error messages that
appear on your screen. These error messages explain what went wrong
when you ran
ibtsta
and describe how you can correct the errors. For
example, the following message might appear on your screen if you
forgot to disconnect all your GPIB cables:
The fact that the ENOL error was not received when expected
indicates the possible presence of other devices on the bus.
Please disconnect ALL GPIB cables from the GPIB board, then
run this test again.
If you are still unable to run
ibtsta
and/or
ibtstb
successfully after
you have followed the suggestions provided by the error messages, fill
out the forms in Appendix C, Customer Communication, and contact
National Instruments for assistance. For answers to other common
questions, refer to Appendix B, Common Questions.