©
National Instruments Corporation
ix
GPIB-ENET for MacOS
About
This
Manual
This manual contains instructions for installing and configuring the
National Instruments GPIB-ENET and NI-488.2 software for MacOS.
This manual is meant to be used with the NI-488.2 User Manual for
MacOS and the NI-488.2 Function Reference Manual for MacOS.
This manual assumes that you are familiar with the MacOS and with
Ethernet and Internet networks, and that your Macintosh is connected
to an Ethernet network. This manual also assumes you have MacTCP
installed on your Macintosh, which is required before you can use the
driver software for the GPIB-ENET. MacTCP is available from Apple
Computer, Inc.
How to Use This Manual Set
NI-488.2
User Manual for
MacOS
Application
Development
and Examples
NI-488.2 Function
Reference Manual
for MacOS
Function
and Routine
Descriptions
Novice
Users
Experienced
Users
Getting Started
Manual
Installation and
Configuration
