Chapter 3
Software Installation and Configuration
©
National Instruments Corporation
3-3
GPIB-ENET for MacOS
2.
To install the NI-488.2 software, click on the icon on the left side
of the Installer window, shown in Figure 3-1, and drag it to any
available disk on the right side of the window.
Figure 3-1.
Installer Window
After installation of all of the software, the
NI-488.2
folder should
contain the items shown in Figure 3-2. The installer places the
NI-488 Config
file in the
Control Panels
folder and the
NI-488 INIT
and
NI-DMA/DSP
files in the
Extensions
folder.
Figure 3-2.
File and Folder Organization after Installation
