Appendix A
Resetting the FP-1600
FieldPoint FP-1600 User Manual
A-2
www.natinst.com
Figure A-1.
FP-1600 Reset Switch
3.
Looking at the FP-1600 so that the label is upright, as shown in
Figure A-1, use a pen or a small screwdriver to move the reset switch
to the right.
4.
Power up the FP-1600 and wait for the red STATUS LED to flash.
When the LED flashes, the FP-1600 is in reset mode.
5.
Power down the FP-1600 and move the reset switch back to the left.
6.
Reattach the FP-1600 to the rail or panel.
7.
Power up the FP-1600.
The following tips should help you avoid having to manually reset the
module:
•
When you configure the FP-1600, wait for the message
The
module’s configuration was confirmed
. If this message does
not appear, the FP-1600 might not be properly configured.
MODEL:
P/N:
S/N:
FP-1600
185690A-01
ABCD12
Made in the USA
Reset Switch
Normal
Reset
