FieldPoint
™
Operating Instructions
FP-DO-400 and cFP-DO-400
Eight-Channel, 5–30 V Digital Output Module
These operating instructions describe how to install and use the
National Instruments FP-DO-400 and cFP-DO-400 digital output
modules (referred to inclusively as the [c]FP-DO-400). For
information about configuring and accessing the [c]FP-DO-400
over a network, refer to the user manual for the FieldPoint network
module you are using.
Features
The [c]FP-DO-400 is a FieldPoint digital output module with the
following features:
•
Eight digital output channels
•
Sourcing outputs supply up to 1.5 A per channel, 8 A
2
per
module
•
Compatible with voltages from 5 to 30 VDC
•
On/Off LED indicators
•
2,300 V
rms
transient overvoltage protection
•
–40 to 70 °C operation
•
Hot swappable
•
User-configurable startup states
Installing the FP-DO-400
The FP-DO-400 mounts on a FieldPoint terminal base (FP-TB-
x
),
which provides operating power to the module. Installing the
FP-DO-400 onto a powered terminal base does not disrupt the
operation of the FieldPoint bank.
