FP-DIO-550 and cFP-DIO-550
2
ni.com
To install the FP-DIO-550, refer to Figure 1 and complete the
following steps:
1. Slide the terminal base key to position X.
2. Align the FP-DIO-550 alignment slots with the guide rails on
the terminal base.
3. Press firmly to seat the FP-DIO-550 on the terminal base.
When the module is firmly seated, the terminal base latch locks
it into place.
Figure 1.
Installing the FP-DIO-550
Installing the cFP-DIO-550
The cFP-DIO-550
mounts on a Compact FieldPoint backplane
(cFP-BP-
x
), which provides operating power to the module.
Installing the cFP-DIO-550
onto a powered backplane does not
disrupt the operation of the bank.
To install the cFP-DIO-550, refer to Figure 2 and complete the
following steps:
1. Align the captive screws on the cFP-DIO-550
with the holes
on the backplane. The alignment keys on the cFP-DIO-550
prevent backward insertion.
2. Press firmly to seat the cFP-DIO-550
on the backplane.
3. Using a number 2 Phillips screwdriver with a shank of at least
64 mm (2.5 in.) length, tighten the captive screws to 1.1 N
⋅
m
(10 lb
⋅
in.) of torque. The nylon coating on the screws prevents
them from loosening.
1
I/O Module
2
Terminal Base
3
Alignment Slot
4
Key
5
Latch
6
Guide Rails
1
3
2
4
5
6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
