FP-DI-330 and cFP-DI-330
2
ni.com
To install the FP-DI-330, refer to Figure 1 and complete the
following steps:
1. Slide the terminal base key to position X.
2. Align the FP-DI-330 alignment slots with the guide rails on the
terminal base.
3. Press firmly to seat the FP-DI-330 on the terminal base. When
the module is firmly seated, the terminal base latch locks it into
place.
Figure 1.
Installing the FP-DI-330
Installing the cFP-DI-330
The cFP-DI-330
mounts on a Compact FieldPoint backplane
(cFP-BP-
x
), which provides operating power to the module.
Installing the cFP-DI-330
onto a powered backplane does not
disrupt the operation of the bank.
To install the cFP-DI-330, refer to Figure 2 and complete the
following steps:
1. Align the captive screws on the cFP-DI-330
with the holes on
the backplane. The alignment keys on the cFP-DI-330
prevent
backward insertion.
2. Press firmly to seat the cFP-DI-330
on the backplane.
3. Using a number 2 Phillips screwdriver with a shank of at least
64 mm (2.5 in.) length, tighten the captive screws to 1.1 N
⋅
m
1
I/O Module
2
Terminal Base
3
Alignment Slot
4
Key
5
Latch
6
Guide Rails
1
3
2
4
5
6
