National Instruments FieldPoint cFP-1808, Быстрый старт

Страница: 12 / 25

© National Instruments Corporation 11 cFP-1808 Quick Start Guide
The switch settings determine the baud rate when the cFP-1808 is powered on. If
you change the switch settings while the cFP-1808 is on, you must turn it off, then
on again, to apply the new settings and change the baud rate.
The serial interface on the cFP-1808 always uses the following parameters: 1 start
bit, 8 data bits, 1 stop bit, and no parity.
19,200 57,600
38,400 115,200
Table 1. DIP Switch Positions and Corresponding Serial Baud Rates (Continued)
DIP Switches 3–5 Serial Baud Rate DIP Switches 3–5 Serial Baud Rate
1
234
5
ON
1
234
5
ON
1
234
5
ON
1
234
5
ON