National Instruments ENET-232 Series, Руководство пользователя

Страница: 28 / 105

Chapter 3 Ethernet Configuration
© National Instruments Corporation 3-5 ENET-232 and ENET-485 Series User Manual
Consult your network administrator for more details. For more
information about DHCP, refer to the
Using DHCP section in
Chapter 6, Using Your Serial Device Server .
2. In the Properties window, select either Obtain an IP address
automatically (DHCP) or Use the following IP settings .
3. If you select Obtain an IP address automatically (DHCP) , you do
not need to enter any network parameters unless you want to change
the hostname of the Ethernet device. If you select
Use the following
IP settings , enter the network parameters you have chosen for the host
IP address, subnet mask, gateway IP, and DNS server IP, as in the
example shown in Figure 3-3. Refer to the
Static IP Parameters
section for more information.
Figure 3-3. Specifying IP Settings
Note The IP settings in Figure 3-3 are shown only as a format example.
4. You can enter an optional comment to help you identify the device.