Eclypse Z7 Enclosure Assembly Guide
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page
4
of
5
Remove the nuts from the Zmod SMA
connectors using a wrench or pliers.
Leave the washers on the connectors.
Insert the Eclypse Z7 into the 3
rd
rack of
the open end of the aluminum
enclosure, Zmods first.
Place the other end cap over the main
interface faceplate.
Plug the power switch wire into the
SWT (J13) jumper. Plug the fan into the
CASE (J14) jumper.
