Figure 15. cRIO-9034 Panel Mounting Dimensions
108.8 mm (4.26 in.)
217.7 mm (8.57 in.)
199.4 mm (7.85 in.)
1.6 mm (0.06 in.)
11.1 mm (0.44 in.)
138.9 mm
(5.47 in.)
114.3 mm
(4.50 in.)
7.2 mm
(0.29 in.)
25.4 mm
(1.00 in.)
Alternate Mounting Configurations
The maximum operating temperature of 55 °C may be reduced for any mounting configuration
other than the reference mounting configuration. A 10 °C (18 °F) reduction in maximum
operating temperature is sufficient for most alternate mounting configurations. Follow the
for all mounting configurations.
The published accuracy specifications, although not guaranteed for alternate mounting
configurations, may be met depending on the system power and the thermal performance of
the alternate mounting configuration.
Contact NI for further details regarding the impact of common alternate mounting
configurations on maximum operating temperature and module accuracy.
Mounting the cRIO-9034 on a DIN Rail
You can use the NI DIN rail mounting kit to mount the cRIO-9034 on a standard 35-mm DIN
rail.
What to Use
•
cRIO-9034
•
Screwdriver, Phillips #2
•
NI DIN rail mounting kit, 157254-01
–
DIN rail clip
–
M4 × 10 screws (x2)
What to Do
Complete the following steps to mount the cRIO-9034 on a DIN rail.
NI cRIO-9034 User Manual
|
© National Instruments
|
31
