Figure 4. Reset Button Behavior
Press and hold RESET button for
≥
5 s
Press and hold RESET button for
<
5 s
Run Mode
Safe Mode
Press and hold RESET button for
<
5 s
Press and hold RESET button for
≥
5 s
Press and hold
RESET button for
≥
5 s
Press and hold
RESET button for
<
5 s
• Console Out enabled
• Network settings reset
• RT Startup App disabled
• FPGA Startup App disabled
• Console Out enabled
• RT Startup App disabled
• FPGA Startup App disabled
Safe Mode
USER1 Button
The cRIO-9034 has a general-purpose USER1 button that is user-defined. You can read the
state of the USER1 button from your LabVIEW FPGA application.
CMOS Reset Button
The cRIO-9034 has a CMOS reset button that you can use to reset the CMOS and the BIOS.
LEDs
The cRIO-9034 provides the following LEDs.
16
|
ni.com
|
NI cRIO-9034 User Manual
