Figure 1.
CPS-8910 Front and Rear Panels
12 VDC
12 VDC
+
–
PWR/
PWR/
STDBY
STDBY
UP
UP
STREAM
STREAM
x4
x4
x8
x8
11
22
33
44
55
66
77
88
PORT
PORT
UP STREAM
UP STREAM
PORT 1
PORT 2
PORT 3
PORT 4
PORT 5
PORT 6
PORT 7
PORT 8
4
3
1
2
5
12 VDC
12 VDC
+
+
––
PWR/
PWR/
STDBY
STDBY
UP
UP
STREAM
STREAM
x4
x4
x8
x8
11
22
33
44
55
66
77
88
PORT
PORT
1
2
Front Panel
Rear Panel
1. 12 V Power Supply Input
2. LED Indicators
3. x8 Gen 2 Upstream Port
4. x4 Gen 1 Upstream Port
5. x4 Gen 1 Downstream Ports
Both the front and rear panels include the following LEDs:
•
Power indicator—illuminates when the CPS-8910 is powered on.
•
Up Stream
–
Off—no connection.
–
On—connected to a x8 upstream device.
–
Blinking—connected to a x4 upstream device.
•
Ports (1 through 8)
–
Off—no connection.
–
Blinking at 75% duty cycle—connected.
What You Need to Get Started
The following items are included in the device kit:
•
Cabled PCI Express Switch Box x4 10 port
•
Rack-mounting brackets
•
CPS-8910 Getting Started Guide
•
12 V, 24 W power supply
Note
If you are using the CPS-8910 with fiber optic cables, you must
purchase a 12 V, 50 W power supply with the proper connection from a
different source. Refer to the
section of this document for power
supply connector information.
2
|
ni.com
|
CPS-8910 Getting Started Guide