Chapter 2
Installing Compact FieldPoint Hardware and Software
cFP-21xx and cFP-BP-x User Manual
2-10
ni.com
2.
Bolt the rack-mount accessory to a standard 19 in. rack.
3.
Connect the safety ground as explained in the
Caution
Disconnect power before removing the backplane from the rack.
Installing a DIN Rail in the Rack-Mount Accessory
If you are using a rack-mounted cFP-BP-4, you can install a short
(approximately 8 in.) DIN rail to the right of the backplane for mounting
power supplies, terminal blocks, or other accessories. Refer to Figure 2-10.
Figure 2-10.
Installing a Small DIN Rail in the Rack-Mount Accessory
You can install a 16 in. DIN rail in another rack-mount accessory if you
need more DIN rail space.
1
cFP-BP-4 Backplane
2
Screw Holes
3
Short DIN Rail for Power Supply
4
#10-32 Screws, 3/8–1/2 in.
1
2
3
4
