National Instruments CMS-9068, Поддержание работоспособности оборудования

Страница: 21 / 23

7. In the array that contains the line
"IsPrimary":true
, the following line displays the
current IP address:
"IP Address":"
x
.
x
.
x
.
x
"
where
x
.
x
.
x
.
x
is the IP address.
8. To change the IP address, enter the value you want to use. Otherwise, record the IP
address.
9. (Optional) To assign a static IP address, configure the following line in the array as
shown:
"IP Address Request Mode":"1"
10. Save and close the file.
11. If you made changes to the file, insert the USB drive back into the USB port on the
controller front panel. The USER1 LED lights solid, which indicates that the device is
reading network and connection properties. You can remove the USB drive when the
USER1 LED returns to blinking steadily.
Tip
To verify that the device successfully applied changes you made to the
file, reinsert the USB drive in a computer and browse to the
<RootLevel>:
\InsightCM
directory. If the changes were successfully applied, the
upload
folder no longer contains the JSON file you edited, instead, a folder named
applied
contains the file.
Where to Go Next
The following figure describes additional documentation and resources as you use the
CMS/MMS/EMSA-9068.
Figure 15. Where to Go Next
1
2
3
NI InsightCM™
Configuration
and Monitoring Help
CompactRIO
Controller and
Chassis Datasheets
C Series Module
Documentation
Help system with instructions for configuring the NI InsightCM application and
monitoring NI Monitoring devices. To launch this help, open the
InsightCM web application in a web browser and click the
Help link in the
top-right corner of the page.
Device specifications, including power requirements, physical characteristics,
safety and environmental information, and other important information.
Visit
ni.com/manuals
and search your device.
Operating instructions and device specifications for C Series modules that you
can install in a CompactRIO chassis. These documents describe how to
connect sensors, actuators, and other devices to C Series modules.
Visit
ni.com/info
and enter the Info Code
insightcmdocs
to access
documentation for C Series modules that are compatible with NI InsightCM.
20 | ni.com | Maintaining NI CMS-9068, MMS-9068, and EMSA-9068 Hardware for an NI InsightCM Device