National Instruments CMS-9068, Поддержание работоспособности оборудования

Страница: 13 / 23

Figure 10. cRIO-9068 Desktop Mounting Front Dimensions
39.1 mm
(1.54 in.)
17.2 mm
(0.68 in.) 22.5 mm
(0.89 in.)
NI cRIO-9068
Figure 11. cRIO-9068 Desktop Mounting Side Dimensions
127.0 mm
(5.00 in.)
130.0 mm
(5.12 in.)
Installing C Series I/O Modules in the Chassis
Note
Before you install a C Series I/O module in the chassis, ensure that no
I/O-side power is connected to the module. If the device is in a nonhazardous
location, the chassis power can be on when you install modules.
Complete the following steps to install a C Series I/O module in the chassis.
1. Align the module with a slot in the chassis, as shown in the following figure. The module
slots are labeled 1 to 8, left to right.
Note
NI InsightCM device firmware requires that you install certain types of
modules in certain slots. Refer to the I/O Module Arrangements section of this
document for a list of supported modules and corresponding chassis slots.
12 | ni.com | Maintaining NI CMS-9068, MMS-9068, and EMSA-9068 Hardware for an NI InsightCM Device