manualshive.com logo in svg

National Instruments cDAQ-9179, Руководство пользователя

National Instruments cDAQ-9179 - модуль сбора данных с 8-ю слотами для расширения возможностей измерений. Бесплатный пользовательский мануал доступен для скачивания на нашем сайте. Получите инструкцию по эксплуатации с описанием функций и возможностей устройства. Скачать бесплатно с manualshive.com.

Поделиться
Скачать
background image

EtherCAT

®

 is a registered trademark of and licensed by Beckhoff Automation GmbH.

CANopen

®

 is a registered Community Trademark of CAN in Automation e.V.

DeviceNet

™

 and EtherNet/IP

™

 are trademarks of ODVA.

Go!, SensorDAQ, and Vernier are registered trademarks of Vernier Software & Technology. Vernier Software & Technology 
and 

vernier.com

 are trademarks or trade dress.

Xilinx is the registered trademark of Xilinx, Inc.

Taptite and Trilobular are registered trademarks of Research Engineering & Manufacturing Inc.

FireWire

®

 is the registered trademark of Apple Inc.

Linux

®

 is the registered trademark of Linus Torvalds in the U.S. and other countries.

Handle Graphics

®

, MATLAB

®

, Real-Time Workshop

®

, Simulink

®

, Stateflow

®

, and xPC TargetBox

®

 are registered 

trademarks, and TargetBox

™

 and Target Language Compiler

™

 are trademarks of The MathWorks, Inc.

Tektronix

®

, Tek, and Tektronix, Enabling Technology are registered trademarks of Tektronix, Inc.

The Bluetooth

®

 word mark is a registered trademark owned by the Bluetooth SIG, Inc.

The ExpressCard

™

 word mark and logos are owned by PCMCIA and any use of such marks by National Instruments is under 

license.

The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft 
Corporation in the United States and other countries.

Other product and company names mentioned herein are trademarks or trade names of their respective companies.

Members of the National Instruments Alliance Partner Program are business entities independent from National Instruments 
and have no agency, partnership, or joint-venture relationship with National Instruments.

Patents

For patents covering National Instruments products/technology, refer to the appropriate location: 

Help»Patents

 in your 

software, the

patents.txt

 file on your media, or the 

National Instruments Patent Notice

 at 

ni.com/patents

.

Export Compliance Information

Refer to the 

Export Compliance Information

 at 

ni.com/legal/export-compliance

 for the National Instruments global 

trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data.

WARNING REGARDING USE OF NATIONAL INSTRUMENTS PRODUCTS

YOU ARE ULTIMATELY RESPONSIBLE FOR VERIFYING AND VALIDATING THE SUITABILITY AND 
RELIABILITY OF THE PRODUCTS WHENEVER THE PRODUCTS ARE INCORPORATED IN YOUR SYSTEM OR 
APPLICATION, INCLUDING THE APPROPRIATE DESIGN, PROCESS, AND SAFETY LEVEL OF SUCH SYSTEM 
OR APPLICATION.

PRODUCTS ARE NOT DESIGNED, MANUFACTURED, OR TESTED FOR USE IN LIFE OR SAFETY CRITICAL 
SYSTEMS, HAZARDOUS ENVIRONMENTS OR ANY OTHER ENVIRONMENTS REQUIRING FAIL-SAFE 
PERFORMANCE, INCLUDING IN THE OPERATION OF NUCLEAR FACILITIES; AIRCRAFT NAVIGATION; AIR 
TRAFFIC CONTROL SYSTEMS; LIFE SAVING OR LIFE SUSTAINING SYSTEMS OR SUCH OTHER MEDICAL 
DEVICES; OR ANY OTHER APPLICATION IN WHICH THE FAILURE OF THE PRODUCT OR SERVICE COULD 
LEAD TO DEATH, PERSONAL INJURY, SEVERE PROPERTY DAMAGE OR ENVIRONMENTAL HARM 
(COLLECTIVELY, “HIGH-RISK USES”). FURTHER, PRUDENT STEPS MUST BE TAKEN TO PROTECT AGAINST 
FAILURES, INCLUDING PROVIDING BACK-UP AND SHUT-DOWN MECHANISMS. NI EXPRESSLY DISCLAIMS 
ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS OF THE PRODUCTS OR SERVICES FOR HIGH-RISK 
USES.

Содержание cDAQ-9179













































































































Отзывы:

Нет отзывов

Похожие инструкции для cDAQ-9179

Kentrox AISWITCH Manual preview
AISWITCH
Бренд: Kentrox Страницы: 306
Philips LC1.15E Service Manual preview
LC1.15E
Бренд: Philips Страницы: 24
Philips L04E AD Service Manual preview
L04E AD
Бренд: Philips Страницы: 28
Philips L01H.1A Service Manual preview
L01H.1A
Бренд: Philips Страницы: 74
Philips L04LAA Service Manual preview
L04LAA
Бренд: Philips Страницы: 94
Philips L9.1A Service Manual preview
L9.1A
Бренд: Philips Страницы: 113
Philips L9.2E AA Service Manual preview
L9.2E AA
Бренд: Philips Страницы: 122
F5 ARX-2000 Hardware Installation Manual preview
ARX-2000
Бренд: F5 Страницы: 80
DANA SPICER PACCAR 220ev Troubleshooting Manual preview
SPICER PACCAR 220ev
Бренд: DANA Страницы: 761
Advantech IPC-3026 User Manual preview
IPC-3026
Бренд: Advantech Страницы: 30
Advantech HPC-7484 User Manual preview
HPC-7484
Бренд: Advantech Страницы: 32
NI 787040-01 User Manual preview
787040-01
Бренд: NI Страницы: 22
nMedia PRO-LCD Quick Installation Manual preview
PRO-LCD
Бренд: nMedia Страницы: 40
ADLINK Technology PXIS-2700 User Manual preview
PXIS-2700
Бренд: ADLINK Technology Страницы: 43
ADLINK Technology PXIS-3320 User Manual preview
PXIS-3320
Бренд: ADLINK Technology Страницы: 50
ADLINK Technology cPCIS-6418U Series User Manual preview
cPCIS-6418U Series
Бренд: ADLINK Technology Страницы: 66
Multitech CC4800 Hardware Manual preview
CC4800
Бренд: Multitech Страницы: 31
Hypercom IEN 1000 Hardware Reference Manual preview
IEN 1000
Бренд: Hypercom Страницы: 198

Бренды по названию

Популярные бренды

Загрузить еще бренды