background image

BNC/TC-2095 Rack-Mount Adapter Installation Guide

2

ni.com

Conventions

The following conventions are used in this guide:

The 

 symbol indicates that the text following it applies only to a specific 

product, a specific operating system, or a specific software version.

<>

Angle brackets that contain numbers separated by an ellipsis represent a 
range of values associated with a bit or signal name—for example, 
DBIO<3..0>. Angle brackets also can denote a variable in a channel 
name—for example, ACH<i>.

»

The 

»

 symbol leads you through nested menu items and dialog box options 

to a final action. The sequence 

File»Page Setup»Options

 directs you to 

pull down the 

File

 menu, select the 

Page Setup

 item, and select 

Options

 

from the last dialog box.

This icon denotes a note, which alerts you to important information.

This icon denotes a caution, which advises you of precautions to take to 
avoid injury, data loss, or a system crash.

 

When this symbol is marked on 

the product, refer to the 

Read Me First: Safety and Radio-Frequency 

Interference

 document, shipped with the product, for precautions to take.

When symbol is marked on a product it denotes a warning advising you to 
take precautions to avoid electrical shock.

When symbol is marked on a product it denotes a component that may be 
hot. Touching this component may result in bodily injury.

bold

Bold text denotes items that you must select or click in the software, such 
as menu items and dialog box options. Bold text also denotes parameter 
names and hardware labels.

italic

Italic text denotes variables, emphasis, a cross reference, or an introduction 
to a key concept. This font also denotes text that is a placeholder for a word 
or value that you must supply.

monospace

Text in this font denotes text or characters that you should enter from the 
keyboard, sections of code, programming examples, and syntax examples. 
This font is also used for the proper names of disk drives, paths, directories, 
programs, subprograms, subroutines, device names, functions, operations, 
variables, filenames and extensions, and code excerpts.

Содержание BNC-2095




















Отзывы: