BNC-2090A Quick Start Guide
2
ni.com
Installing the BNC-2090A
To connect the BNC-2090A to your DAQ device, refer to Figure 2 as you
complete the following steps. Consult your computer user manual or
technical reference manual for specific instructions and warnings.
Note
If you have not already installed your DAQ device, refer to the
DAQ Getting Started
Guide
for instructions.
Figure 2.
Connecting the BNC-2090A to Your DAQ Device
1.
Place the BNC-2090A near the host computer or mount the
BNC-2090A into a 19 inch rack. If you do not rack-mount the
accessory, attach the four adhesive rubber feet included in the
BNC-2090A kit to the bottom of the accessory.
2.
Connect the BNC-2090A to the DAQ device using the front or rear
68-position connector, shown in Figure 1. Refer to Table 1 to verify
that you have the appropriate cable for your DAQ device.
1
BNC-2090A
2
Shielded Cable
3
E/M Series DAQ Device
4
Personal Computer
NAT
ION
AL
INST
RUM
ENT
S
BN
C-2
090
A
1
4
2
3
