National Instruments AT-GPIB/TNT Скачать руководство пользователя страница 11

Страница: 11 / 64

About This Manual

National Instruments Corporation

Use the NI-488.2M Function Reference Manual for Win32 for specific
NI-488 function and NI-488.2 routine information, such as format,
parameters, and possible errors.

Organization of This Manual

This manual is organized as follows:

• Chapter 1,

Introduction

, explains how to use this manual, lists what

you need to get started, provides an overview of the AT-GPIB/TNT
and the GPIB software, and describes optional equipment you can
order.

• Chapter 2,

Installation and Configuration

, describes how to install

and configure the AT-GPIB/TNT hardware and the GPIB software.

• Chapter 3,

Verify the Installation

, describes how to verify the

hardware and software installation.

• Chapter 4,

Begin to Use the GPIB Software

, helps you get started

with the GPIB software.

• Appendix A,

Uninstalling the Hardware and Software

, describes

how to uninstall your AT-GPIB/TNT and the GPIB software.

• Appendix B,

Troubleshooting and Common Questions

, describes

how to troubleshoot problems and answers some common
questions.

• Appendix C,

Specifications

, describes the physical characteristics

of the AT-GPIB/TNT, the transfer rates of the GPIB software, and
the recommended operating conditions.

• Appendix D,

Customer Communication

, contains forms you can

use to request help from National Instruments or to comment on our
products and manuals.

•

The

Glossary

contains an alphabetical list and a description of

terms used in this manual, including abbreviations, acronyms,
metric prefixes, mnemonics, and symbols.

Содержание AT-GPIB/TNT

































































Результаты поиска

Содержание AT-GPIB/TNT

Отзывы:

National Instruments AT-GPIB/TNT, Начало работы, Страница: 11 / 64

Результаты поиска

Содержание AT-GPIB/TNT

Отзывы: