manualshive.com logo in svg

National Instruments AT-GPIB/TNT, Начало работы, Страница: 38 / 64

Поделиться
Скачать
National Instruments AT-GPIB/TNT Скачать руководство пользователя страница 38

©

 National Instruments Corporation

4-1

AT-GPIB/TNT for Windows 98/95

Chapter

4

Begin to Use the 
GPIB Software

This chapter helps you get started with the GPIB software.

Getting Started with LabVIEW

LabVIEW is a fully-functional graphical programming environment used 
to develop measurement and automation applications. LabVIEW features 
comprehensive libraries for instrument control, data analysis, and data 
presentation. If you already installed LabVIEW, you can use the LabVIEW 
GPIB functions without any additional installation. To learn about the basic 
concepts of GPIB communication, refer to the LabVIEW GPIB functions 
chapter in the LabVIEW User Manual. To learn more about each GPIB 
function, refer to the LabVIEW Function and VI Overview Manual and the 
online help.

National Instruments provides LabVIEW instrument drivers to simplify 
application development. Instrument drivers are high-level functions that 
eliminate the need to learn the complex, low-level programming commands 
for each instrument.   For more information, refer to Chapter 7, Getting 
Started with a LabVIEW Instrument Driver, in the LabVIEW User Manual. 
If you want to write your own instrument driver, National Instruments 
provides application notes that help you get started.

To use instrument drivers in LabVIEW, select the Instrument Wizard 
from the Project menu.

For more information about National Instruments products, refer to our 
web site at 

http://www.natinst.com/products/

.

Getting Started with LabWindows/CVI

LabWindows/CVI is an interactive C development environment used 
to build measurement and automation applications. It provides 
comprehensive libraries for instrument control, data analysis, and data 
presentation. If you already installed LabWindows/CVI, you can use the 
LabWindows/CVI GPIB Library without any additional installation. The 

Содержание AT-GPIB/TNT

































































Отзывы:

Нет отзывов