Double-height kits
Item
Component
Quantity
5
Support bracket, AMUX, type 2
2
6
Screw, 6-32 x 1/4, FLHD, PHIL, SS
4
You will also need the following items from your kit, regardless of which version you have.
All of the DAQ board accessories rack-mount kits have the following items:
Item
Component
Quantity
1
Bracket, rack-mount, 5.25 in., type DA
1
3
Screw, 4-40 x 1/4, PHN, SS
4
7
Foot, rubber adhesive
4
DAQ Board Accessories Rack-Mount Kit
Installation Guide
1
In addition, you will need:
1-point Phillips-head screwdriver for assembling the rack-mount kit
flathead screwdriver for installing the kit into a cabinet
circuit card assemblies.
Mounting Space
The following table shows how much space each accessory requires in a single-height
rack-mount kit. Three SC-205X (except for the SC-2054) or SC-206X boards fit into one
rack-mount kit. You can mix SC Series accessories in one rack-mount kit. For example, you
can use one SC-2051 with two SC-206X units, or one SC-2051 with one SC-207X.
Accessory
Width Required
AMUX-64T
Two-thirds
SC-2050, SC-2051, SC-2052, SC-2053
One-third
SC-2054
One-half
SC-206X Series
One-third
SC-207X Series
One-half
BNC-208X Series
One-half
