© National Instruments
|
1-3
NI 7330 User Manual and Specifications
ANSI C-based LabWindows/CVI also features interactive graphics and a state-of-the-art user
interface. Using LabWindows/CVI, you can generate C code for custom data acquisition, test,
and measurement and automation solutions. NI-Motion includes a series of sample programs for
using LabWindows/CVI with National Instruments motion control hardware.
NI Motion Assistant offers a point-and-click interface for creating motion control sequences
quickly and easily. When you have created a motion task, you can use Motion Assistant to output
the task in LabVIEW or C code or code recipes.
Optional Equipment
National Instruments offers a variety of products for use with the NI 7330 motion controller,
including the following accessories:
•
Cables and cable assemblies for motion and digital I/O
•
RTSI cable for connection with other National Instruments devices
•
Universal Motion Interface (UMI) wiring connectivity blocks with integrated motion signal
conditioning and motion inhibit functionality
•
Stepper compatible drive amplifier units with integrated power supply and wiring
connectivity
•
Connector blocks and shielded and unshielded 68-pin screw terminal wiring aids
For more specific information about these products, refer to the National Instruments website at
ni.com
or call your National Instruments sales representative.
Motion I/O Connections
The external motion and digital I/O connectors on the NI 7330 motion controller are
high-density, 68-pin female VHDCI connectors.
For custom cables, use the AMP mating connector (NI part number 787801-1).
Related Documentation
The following documents contain information you might find helpful as you read this manual:
•
NI-Motion Help
•
NI-Motion C Reference Help
•
NI-Motion VI Help
