National Instruments 653 Series, Руководство пользователя

Страница: 4 / 16

NI 653X Cable Adapter User Guide 4 ni.com
Installing Cables
An SHC68-C68-D2 or C68-C68-D4 cable connects the NI 653x cable
adapter to the NI high-speed DIO device. Figure 2 shows how to install the
cable.
Figure 2. Connecting a SHC68-C68-D2 or C68-C68-D4 Cable
to the NI 653x Cable Adapter
Caution
Before connecting the cable, disconnect power from the NI device and any other
connected hardware to prevent damage to the hardware and personal injury. NI is not liable
for damage resulting from improper connections.
Refer to Figure 2 as you complete the following steps to install the cable
adapter:
1. Insert the cable into the cable adapter.
2. Tighten the cable jackscrews.
Caution
Before attaching any cables or accessories, install the NI high-speed DIO device.
Refer to the Getting Started Guide that shipped with your device for instructions on
installing the device.
1 PC Chassis with NI High-Speed DIO Device
2 Cable Assembly
3 Cable Jackscrews
4 NI 653x Cable Adapter
DIGITAL DATA & CONTROL
4
2
NI PCIe-
65
3
x
1
3
NATIONAL
INSTRUMENTS
653X CABLE ADAPTER
Remove scre ws on this side of
enclosure to access terminals.