National Flooring Equipment DL6000P, Руководство по эксплуатации и обслуживанию

Страница: 17 / 52

17
Installation
406816_RevB
4. Connect the dust collectors using the connector brackets. Secure the brackets using the provided pins (4 pins per bracket).
5. Plug each dust collector into the power box.
6. Plug the main power cord into the power supply.
Make sure the power supply corresponds to the voltage and frequency indicated on the dust collector plate.
WARNING:
DO NOT FIT THE PLUG IN THE POWER SOCKET WITH WET HANDS.
In the event of an extension cord being used, make sure this is in perfect condition, in compliance with Ce standards and with cable cross
section suitable for the power input of the dust collector.
Fit the accessory required for the type of vacuuming operation on the opposite end of the hose.
NOTE:
No standard accessories (reducers, hoses, nozzles) are included with the machine; accessories must be specified and ordered
separately.
Contact your dealer for information relating to the different types of optional accessories
available for these specific dust collector models.