17
Operation
WORK CYCLE
1.
Make sure the power plug is correctly fitted in the power socket.
2.
Make sure the flexible hose is properly fitted and locked in the suction inlet.
3. Make sure the power cable and any extension cord used are integral and in perfect condition.
4. Block the dust collector by means of the retainer provided.
5.
Grip one end of the flexible hose complete with selected accessory.
6. Press the
START
button and start collecting.
7. To stop the dust collector, press the
STOP
button.
CAUTION:
BEFORE FITTING THE PLUG, MAKE SURE THE POWER VOLTAGE CORRESPONDS TO THAT ON THE MARKING PLATE.
CAUTION:
BEFORE SWITCHING THE DUST COLLECTOR BACK ON, MAKE SURE THE MOTORS HAVE COME TO A COMPLETE HALT.
403079_RevB
8.
After finishing work, disconnect the dust collector from the power socket.
