Safety
- 10 -
2.4
Outstanding risks
Careful analysis of risks performed by the manufacturer and stored in the technical file has made it possible
to eliminate most of the risks associated with dust collector operation.
The manufacturer advises carefully following the instructions, procedures and advice contained in this
manual as well as applicable safety regulations, including the use of the envisaged protection devices, both
those integrated in the dust collector and individual.
Outstanding risks associated with the dust collector could be:
Electrical maintenance risks caused by the need to work under power.
Only trained personnel should work on the machine with the power supply connected and this must have
double earth insulation.
Risk of improper use in the presence of explosive and flammable substances.
The dust collector must not be used in environments containing substances in the form of liquids that could
vaporize at room temperature and flammable dusts and gas.
Risks of operation in humid environments.
Keep to the limits shown in this manual at section 1.6 Allowed environmental conditions.
Risk of erroneous interpretation of the safety pictograms.
Having identified the various outstanding risks, the manufacturer has affixed to the dust collector a number
of hazard labels in compliance with regulations relating to the graphic symbols to be used. The user must
immediately replace any safety plates that become illegible due to wear or damage.
Attention!
Removing the safety plates on the dust collector is strictly forbidden. The manufacturer declines all
liability in relation to dust collector safety in the event of failure to comply with the above indications.
