manualshive.com logo in svg

National Flooring Equipment BINDPRO, Инструкция по эксплуатации

Поделиться
Скачать
National Flooring Equipment BINDPRO Скачать руководство пользователя страница 6

Safety

6

GENERAL RULES FOR SAFE OPERATION

READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE.

 Before use, ensure operators read and understand this manual. Read and under-

stand labeling on machine and components. Extra copies of the manual are available.

1.  KNOW YOUR EQUIPMENT:

 Read this manual carefully to learn equipment applications and limitations, potential hazards associated with 

this type of equipment. Keep this manual with the equipment it is associated with. 

2.  AVOID DANGEROUS ENVIRONMENTS:

 Do not use in rain, damp or wet locations, or in the presence of explosive atmospheres (gas-

eous fumes, dust or flammable materials). Remove materials or debris that may be ignited by sparks.

3.  KEEP WORK AREA CLEAN AND WELL LIT:

 Cluttered, dark work areas invite accidents.

4.  DO NOT USE ON STEPS.
5.  DRESS PROPERLY:

 Do not wear loose clothing. These may be caught in moving parts. When working wear gloves and insulated non-skid 

footwear. Keep hands and gloves away from moving parts.

6.  USE SAFETY EQUIPMENT:

 Hearing protection is recommended during extended use.

7.  KEEP BYSTANDERS AWAY:

 Children and other bystanders should be kept at a safe distance from the work area to avoid distracting the 

operator and contacting the equipment or extension cord. Operator should be aware of the proximity of bystanders. This machine is not 

intended for use by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge. Equipment is not 

to be used by children.

8.  USE PROPER ACCESSORIES:

 Using accessories that are not recommended may be hazardous. Be sure accessories are properly 

installed and maintained. Do not remove a guard or other safety device when installing an accessory or attachment.

9.  CHECK FOR DAMAGED PARTS:

 Inspect guards and other parts before use. Check for misalignment, binding of moving parts, improper 

mounting, broken parts and other conditions that may affect operation. If abnormal noise or vibration occurs, turn off immediately and 

have the problem corrected before further use. Do not use damaged equipment. Tag damaged equipment “DO NOT USE” until repaired. 

Missing or damaged parts should be properly repaired or replaced immediately. For all repairs, use only identical NFE replacement parts.

10.  GUARD AGAINST ELECTRIC SHOCK:

 Prevent body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. 

Hold your equipment by insulated nonmetal grasping surfaces. Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards.

11.  DO NOT FORCE EQUIPMENT:

 Equipment will perform best at the rate for which it was designed. Excessive force only causes operator 

fatigue, increased wear, reduced control and may cause needle deflection.

12.  KEEP HANDS AWAY FROM ALL MOVING PARTS.
13.  STAY ALERT:

 Watch what you are doing, and use common sense. Do not use when you are tired, distracted or under the influence of 

drugs, alcohol or any medication causing decreased control.

14.  MAINTAIN LABELS AND NAMEPLATES:

 These carry important information. If unreadable or missing, contact NFE for a replacement.

15.  MACHINE IS HEAVY, DO NOT DROP.

 Ensure proper lifting procedures are followed when transporting.

Содержание BINDPRO





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды