National Electronics & Watch M11-1656D, Инструкция по эксплуатации

Страница: 5 / 13

National Electronics & Watch Co,. Ltd.
BC10
Watch reset:
The user can reset the watch by pressing and holding S1, S5, S7 and S11 simultaneously. All
segments will be light on, then EL backlight ON. The software code will be displayed. The
watch will be reset. Below are the reset views.
EL backlight:
This watch has a Night mode function . Following are the options in SET mode and their
functions:
10 SECONDS – Press S11 will turn ON the Light for 10 seconds.
20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
NIGHT ON – Light will continuously ON when CHRONO is running from 6:00 pm to 7:00 am.
But when CHRONO is stopped or reset from 6:00 pm to 7:00 am, press any key can turn ON
the light for about 10 seconds.
TIME MODE
Following are the views with the corresponding information displayed:
Time 1 or Time2, Month, Date, City code, Weekday and battery level indicator.
Note: While in Time mode, User has an option to use a short cut key, press S1 to go to RUN
mode while press S5 to go to HRM mode.
TIME 1 setting in SET mode:
You have two options in setting the watch, GPS or MANUAL . In manual setting, you can
manually set the time. If you select the GPS option, the watch will be automatically set
based on the data and time data from GPS satellites.
•
In SET mode, press S1 or S5 for Time setting
•
Press S3 and Time 1 appears.
•
Press S1 or S5 for Time 1 or Time 2 setting
•
Press S3 to confirm
•
Select GPS or MANUAL setting by pressing S1 or S5 and then press S3 to enter.
GPS setting:
¾
Select TIME ZONE by pressing S1 or S5 and then press S3 to enter. There are 36
cities to select in this time zone setting.
¾
Select DST ON or OFF by pressing S1 or S5 and then press S3 to enter.
¾
Select 12H or 24H format setting by pressing S1 or S5. Press S3 to enter.
¾
Select M-D or D-M (Month/Day or Day/Month) format setting by pressing S1/S5. Press
S3 to enter and the watch will go back to Time.
MANUAL setting:
¾
Set the HOUR by pressing S1 or S5 and then press S3 to enter.
¾
Set the Minute by pressing S1 or S5 and then press S3 to enter.
¾
Set the SECOND by pressing S1 or S5 and then press S3 to enter.
¾
Set the YEAR by pressing S1 or S5 and then press S3 to enter.
¾
Set the MONTH by pressing S1 or S5 and then press S3 to enter.
¾
Set the DATE by pressing S1 or S5 and then press S3 to enter.
¾
Set the 12/24H by pressing S1 or S5 and then press S3 to enter.
¾
Select M-D or D-M (Month/Day or Day/Month) format setting by pressing S1/S5. Press
S3 to enter and the watch will go back to Time.
TIME 2 setting in SET mode:
You have two options in setting the watch, GPS or MANUAL . In manual setting, you can
manually set the time. If you select the GPS option, the watch will be automatically set base
on the data and time data from GPS satellites.
The procedure in setting time 2 is the same with time 1 setting.
12H/24H format setting:
You can select 12H or 24H format. Press S3 to enter setting mode. Press S1 or S5 to select
12H or 24H format. Press S3 to confirm and exit.