National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA P: 708-343-0400 / F: 708-343-0625 / E: [email protected]
www.nationalcycle.com
©2021 National Cycle, Inc.
Page 2 of 4
10-118624-000 03/21
WINDSHIELD INSTALLATION
INSTALLING WRAPAROUND CLAMPS
Figure 1
Place Windshield on the vehicle hood and against the
front frame rails of the vehicle.
Then install and align the eight Wraparound Clamps (B)
onto the frame rails of the vehicle.
Illustration A
Orient the clamps so that the male half (with embossed
part number) is toward the windshield and the front of the
vehicle.
ASSEMBLING WINDSHIELD TO THE WRAPAROUND
CLAMPS
Place all fasteners within reach of windshield
installation procedure.
Illustration B
Loosely install the following parts through the Windshield
Grommets and into the eight Wraparound Clamps (B) as
shown in illustration B.
(Phillips Screwdriver)
• Machine Screws (C)
• Flat Black Washers (D)
• Retainer Pins (E)
Note the hex shape of the Retainer Pins and male
Clamp halves.
Figure 1
Illustration A
Illustration B
