National Cycle, Inc.
PO Box 158 Maywood, IL 60153-0158 USA P: 708-343-0400 / F: 708-343-0625 / E: [email protected]
www.nationalcycle.com
©2021 National Cycle, Inc.
Page 3 of 4
10-118622-000 03/21
Figure 3
WINDSHIELD INSTALLATION; CONT’D
SECURE VELCRO® STRIPS TO VEHICLE HOOD
Figure 2
Check the alignment and position of the Windshield and
make sure it is even and symmetrical. Snug up the wind-
shield bottom against the hood.
Remove the adhesive backing from the Velcro® loop
material on the lower edge of the windshield (see detail
inset) and then press the windshield tabs firmly onto the
hood of the vehicle.
FINAL TIGHTENING
Figure 3
Now that the Windshield is in its final position, securely
tighten the Machine Screws (C) in the eight Wraparound
Clamps.
(Phillips Screwdriver)
Your new Quantum® Hardcoated Polycarbonate
Windshield is now fully assembled.
Test ride for function and performance, and enjoy
your new National Cycle UTV Windshield!
Figure 2
WASH'N'WIPE™ WIPER KITS
This windshield is pre-drilled and prepped for the installa-
tion of National Cycle’s optional Wash'n'Wipe Wiper Kit.
Part No. N30213-WK
