Natec MOUSE LYNX, Руководство пользователя

Страница: 11 / 12

11
Note: During normal operation, if you press the "connect" button by mistake, you
should re-connecting, follow the steps 1 to 4 again.
BATTERY LOW INDICATOR
When battery voltage level goes under the preset level, the LED on the mouse top cover
will blink frequency. Although the mouse can still work for a while, the user, at this time,
should have a new set of batteries ready for replacement as soon as possible.
Dpi description
Resolution 800dpi 1200dpi 1,600dpi
LED behavior LED will flash once
then go off
LED will flash 8
seconds, then go off
LED will light 8
secconds, then go off
Note: 1. Each dpi level setting needs to press the dpi select button more than 0.5 sec.
2. Each dpi level indicator shows 8 seconds, in the 8 seconds period, can’t
execute the next level dpi setting.
POWER ON/OFF MOUSE
Power off the mouse
For traveling user, this Lynx BT-Mouse provides one sliding-switch on the bottom of
mouse. User just pushes the sliding-switch to the “OFF” position to power-off this BT-
mouse.
Power on the mouse
When this BT-mouse is in sleep mode, to activate the mouse again, just need to move the
mouse. If this mouse is power-off, user needs to push the sliding-switch to the “ON”
position, and move this BT-mouse to wake up the mouse connection.