NatComm MULTIPLE INPUT UNIT, Руководство пользователя, Страница: 3 / 8

Natcomm Page 3
DESCRIPTION Cont.
During Message play MIU can be configured to handle further Switch
triggering in 3 separate modes :
MODE 1 (Default Mode) MIU will STORE up to 10 further triggers
and then instruct TDU to play these Messages in trigger order. This
is the default mode.
MODE 2 - MIU will IGNORE any further triggering while playing a
Message. Triggering will only take place when a Message is NOT
PLAYING.
MODE 3 - MIU will INTERRUPT an existing Message. In this
situation a trigger during Message Play will cause the existing
Message to STOP and the NEW MESSAGE WILL PLAY.
The appropriate MIU Triggering Mode is set by REMOVING JUMPER
CONNECTORS which are linking PINS that are accessed through a small
hole located on the underside of
MIU (see below).
Note : The Jumpers are not in order
To Set MODE 1 - Leave all 3 JUMPERS in place.
To Set MODE 2 - Remove JUMPER 1.
To Set MODE 3 - Remove ALL 3 JUMPERS.
Note : For Jumper Settings to update, you MUST power down the MIU by disconnecting the input cable
from the TDU for 15 seconds or more.
Jumper 1
Jumper 3
Jumper 2