background image

 

AA35-001 Audio Mixer Panel 

SM25 Installation and Operation Manual 

 

 

Section 2 Rev: 1.00 

Issue 4 

Page 2-1 

ENG-FORM: 805-0117.DOT 
 

CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD. 

Section 2 Installation 

2.1  

Introduction 

Information in this section consists of unpacking and inspection procedures, installation procedures, post-
installation checks and installation drawings for the AA35-001 Audio Mixer Panel.

  

 
Review all notes, warnings and cautions. 

2.2  

Unpacking and Inspection 

Unpack the equipment carefully and locate the warranty card. Inspect the unit visually for damage due to 
shipping and report all such claims immediately to the carrier involved. Check that all items listed below 
are present before proceeding and report any shortage immediately to your supplier: 

- Warranty Card 

-  Operators Manual  

-  Certificate of Conformity or Release Certification 

2.2.1  

Warranty 

All Northern Airborne Technology Ltd. products are warranted for 2 years from date of installation by an 
authorized NAT dealer, to be free of defects in workmanship or performance. This warranty covers all 
materials and labour, but is exclusive of any transport to deliver the defective unit to and from NAT or its 
designated warranty repair center, or any labour to remove or re-install the defective unit in the aircraft. 
Contact NAT for any questions regarding this warranty, its applicability to your units and/or for return 
authorization. NAT is the final arbitrator concerning warranty administration. Units which have been 
physically damaged, burned, immersed in water or otherwise abused beyond the scope of normal use will 
not be considered for warranty. 

WARRANTY IS VOID UNLESS THE PRODUCT IS INSTALLED BY AN 

AUTHORIZED NAT DEALER

. Product for which a warranty card is not returned shall be warranted from 

date of manufacture. 

2.3  

Continued Airworthiness 

Maintenance of the AA35-001 Audio Mixer Panel is ‘on condition’ only.  Periodic maintenance of this 
product is not required.  

2.4  

Installation Procedures 

2.4.1  

Warnings 

WARNING:

 

High volume settings can cause hearing damage.  

Set the headset volume control to the minimum volume setting prior to 

conducting tests, and slowly increase the headset volume to a 

comfortable listening level.  

Содержание AA35-001


















Отзывы: