sCreen 1 (figure 23)
Displays current values for Power (watts), Speed, Slope, Trip Distance and Ride Time. The speed comparison arrows in the upper right
corner of the screen compare current speed to average speed. An upward arrow indicates your current speed is above your average
speed. A downward arrow indicates your current speed is below your average speed.
A. Current Power
B. Current Speed
C. Slope
D. Trip Distance
E. Ride Time
F. Speed Comparison
sCreen 2 (figure 24)
Displays average values for Power (watts), Speed and Slope. Also displayed are Trip Distance, Ride Time and Speed Comparison arrows.
A. Average Power
B. Average Speed
C. Average Slope
D. Trip Distance
E. Ride Time
F. Speed Comparison
sCreen 3 (figure 25)
Displays maximum values for Power (watts) and Speed, Elevation Gain, Total Distance (odometer) and Total Ride Time. Also displayed are
the Speed Comparison arrows. The Total Distance and Total Ride Time values represent total distance and time accumulated on all rides
to date, and will not be reset when the data screens are cleared (see Section C, “Reset”).
A. Maximum Power
B. Maximum Speed
C. Elevation Gain
D. Total Distance
E. Total Ride Time
F. Speed Comparison
b. baTTerY life inDiCaTor
When battery life is low, a battery icon will flash in the display screen to indicate only a few hours of battery life remain. See Figure 26.
When the battery icon appears, replace the transmitter batteries (in the resistance unit) and console batteries as soon as possible.
C. reseT
At the beginning of each ride you’ll want to perform a reset to clear from memory the data from your previous ride.
1. To clear the data, press and hold the SET button. After 3 seconds, “CLEAR” will be displayed (at this point no data has been deleted).
Continue to hold the SET button and in another 3 seconds “DONE” will appear, indicating that all accumulated data (except Total
Distance and Total Ride Time) has been cleared from memory. See Figure 27.
2. To reset Total Distance and Total Ride Time (as well as all other data), press and hold both the SET and MODE buttons. After 8 seconds
“CLEAR” will be displayed (at this point no data has been deleted). Continue to hold the SET and MODE buttons, and in another 2
seconds “DONE” will appear, indicating that all accumulated data has been cleared from memory.
D. auTo off
After 2 minutes of inactivity (no pedaling or button presses) the system will automatically
switch off to prolong battery life. Current values will be maintained. To turn the system back on press either button (SET or MODE) or begin
pedaling.
e. suMMarY lisT of riDe DaTa
4
Содержание BN-WMF11
Страница 1: ......
Страница 2: ...For Technical support call 1 800 888 2710 0211 1 BN WMF11 Made in Italy ...
