General Instructions For Use
A. Pressurizing the Veins with Synthetic Blood:
1. Add 1 pint of distilled water to the pint bottle with blood powder;
shake it to mix.
2. Be sure the clamp on the fluid supply bag A tubing is closed,
fill it with the blood and hang the bag no more than 18" above
the level of the arm. (See Figure 1 and inset.) (Fluid Supply Stand
shown sold separately.)
3. Attach the fitting end of the fluid supply bag A tubing to one
of the shoulder tubes. (Make sure the arm is palm down at this
point.) (See Figure 2.)
Note: Connecting the fluid supply bag to the shoulder tube may
require a small amount of water soluble lubricant, heating the
shoulder tube end in the palm of a warm hand, or dipping the
shoulder tube end into warm water.
A.
B.
Figure 1
Figure 2
5
