PROCEDURE C
PROCEDURE C
PRACTICE MODES SESSIONS
Select one of the four modes you wish to
practice by pushing the mode button until the
red light corresponding to the proper mode
illuminates. The unit will advance the light one
position each time the mode key is pushed.
(See figure 22.)
The unit will automatically
switch between compression and ventilation
modes, depending on which one is being
applied.
Compression Rate
In the compression rate mode, the unit will
display the average rate in compressions per
minute of the last five compressions. The unit
will continue to update this average until you
change modes or push the stop button. Upon
pushing the stop button, the unit will calculate
and display the average compression rate of
all compressions from the start of the present
cycle. Any compressions made after the stop
button is pushed will start a new cycle.
Compression Depth
In the compression depth mode, the unit will
display the average depth in inches of the
last compression. The unit will continue this
display mode until the mode is changed or
the stop button is pushed. Upon pushing
the stop button, the unit will calculate and
display the average depth of all compres-
sions from the start of the present cycle. Any
compressions made after the stop button is
pushed will start a new cycle.
Note:
Failure to allow the torso to fully recoil
after each compression will negatively affect
the student’s average.
Ventilation Duration
In the ventilation duration mode, the unit will
display the duration in seconds of the last
ventilation. The unit will continue this display
mode until the mode is changed or the stop
button is pushed. Upon pushing the stop
button, the unit will calculate and display the
average duration of all ventilations from the
start of the present cycle. Any ventilations
made after the stop button is pushed will start
a new cycle.
Ventilation Volume
In the ventilation volume mode, the unit will
display the volume in liters of the last ventila-
tion. The unit will continue this display mode
until the mode is changed or the stop button
is pushed. Upon pushing the stop button, the
unit will calculate and display the average
volume of all ventilations from the start of the
present cycle. Any ventilations made after the
stop button is pushed will start a new cycle.
Auto Mode
This unit is designed to automatically switch
between compression and ventilation modes,
depending on which one is being applied.
Defibrillation “Defib” Mode
This unit is designed with a defib simulator.
After the defib button is pressed, a light indi-
cating so will illuminate. The light will remain
on for 30 seconds. While this light is on, no
further defibrillations can be performed. A
“lightning bolt” icon will also appear on the
printout at this point.
Note:
This manikin cannot be shocked with
a defibrillator. The 30-second pause is to
simulate the time it would take to administer
defibrillation to the patient.
PRACTICE MODES SESSIONS
Select one of the four modes you wish to
practice by pushing the mode button until the
red light corresponding to the proper mode
illuminates. The unit will advance the light one
position each time the mode key is pushed.
(See figure 22.)
The unit will automatically
switch between compression and ventilation
modes, depending on which one is being
applied.
Compression Rate
In the compression rate mode, the unit will
display the average rate in compressions per
minute of the last five compressions. The unit
will continue to update this average until you
change modes or push the stop button. Upon
pushing the stop button, the unit will calculate
and display the average compression rate of
all compressions from the start of the present
cycle. Any compressions made after the stop
button is pushed will start a new cycle.
Compression Depth
In the compression depth mode, the unit will
display the average depth in inches of the
last compression. The unit will continue this
display mode until the mode is changed or
the stop button is pushed. Upon pushing
the stop button, the unit will calculate and
display the average depth of all compres-
sions from the start of the present cycle. Any
compressions made after the stop button is
pushed will start a new cycle.
Note:
Failure to allow the torso to fully recoil
after each compression will negatively affect
the student’s average.
Ventilation Duration
In the ventilation duration mode, the unit will
display the duration in seconds of the last
ventilation. The unit will continue this display
mode until the mode is changed or the stop
button is pushed. Upon pushing the stop
button, the unit will calculate and display the
average duration of all ventilations from the
start of the present cycle. Any ventilations
made after the stop button is pushed will start
a new cycle.
Ventilation Volume
In the ventilation volume mode, the unit will
display the volume in liters of the last ventila-
tion. The unit will continue this display mode
until the mode is changed or the stop button
is pushed. Upon pushing the stop button, the
unit will calculate and display the average
volume of all ventilations from the start of the
present cycle. Any ventilations made after the
stop button is pushed will start a new cycle.
Auto Mode
This unit is designed to automatically switch
between compression and ventilation modes,
depending on which one is being applied.
Defibrillation “Defib” Mode
This unit is designed with a defib simulator.
After the defib button is pressed, a light indi-
cating so will illuminate. The light will remain
on for 30 seconds. While this light is on, no
further defibrillations can be performed. A
“lightning bolt” icon will also appear on the
printout at this point.
Note:
This manikin cannot be shocked with
a defibrillator. The 30-second pause is to
simulate the time it would take to administer
defibrillation to the patient.
Figure 22
Figure 22
20
20
HC18000028INM3_2UP.indd 20
8/17/18 8:44 AM