6
6.
Once the system is filled, close the clamp on (resting) fluid supply bag and leave
(hanging) fluid supply bag clamp open. The arm is now fully pressurized and can be used
palm up or down.
(See figure 6.)
Figure 6
Figure 7
B. IV Injection and Withdrawal
1.
Start with a fully pressurized arm. See procedure A under General Instructions for Use.
2.
Close the clamp on the resting fluid supply bag.
3.
Open the clamp on the hanging fluid supply bag.
The arm is now ready to perform injections or withdrawals along any of the 8 fluid lines
present in the arm. Nasco recommends the use of small diameter needles for these
procedures; 20- to 25-gauge. Use only distilled water to prep the injection sites and as an
injection. A realistic flashback will occur when the vein has been properly punctured.
(See Figure 7.)
6
6.
Once the system is filled, close the clamp on (resting) fluid supply bag and leave
(hanging) fluid supply bag clamp open. The arm is now fully pressurized and can be used
palm up or down.
(See figure 6.)
Figure 6
Figure 7
B. IV Injection and Withdrawal
1.
Start with a fully pressurized arm. See procedure A under General Instructions for Use.
2.
Close the clamp on the resting fluid supply bag.
3.
Open the clamp on the hanging fluid supply bag.
The arm is now ready to perform injections or withdrawals along any of the 8 fluid lines
present in the arm. Nasco recommends the use of small diameter needles for these
procedures; 20- to 25-gauge. Use only distilled water to prep the injection sites and as an
injection. A realistic flashback will occur when the vein has been properly punctured.
(See Figure 7.)
HC190001INM3.indd 11-12
12/20/18 8:42 AM
