Set Up
1. To prepare blood mixture:
a. Combine 11/4 cups of
tap water with the artificial
blood powder in the pint
bottle provided. Add one
full tube of lubricating jelly
(measuring cup not includ-
ed). (See Figures 1-3.)
b. Shake vigorously for 30
seconds or until contents
are mixed completely.
2. Fill the 60 cc syringe with blood
mixture by placing the tubing
end of the syringe into the pint
bottle and drawing the mixture
into the syringe. (See Figure 4.)
3. The free end of the tubing goes
through the hole on the outside
of the adult I/O simulator.
(See Figure 5.)
4. Attach the free end of the tubing
onto swivel end of the simulated
bone. (See Figure 6.) Use the
supplied lubricant as needed to
ease the tubing assembly onto
the swivel end of the simulated
bone.
4
SETUP
1.
To prepare blood mixture:
a.
Combine 11/4 cups of tap water with the artificial blood powder in the pint bottle pro-
vided. Add one full tube of lubricating jelly (measuring cup not included).
(See figures 1-3.)
b.
Shake vigorously for 30 seconds or until contents are mixed completely.
2.
Fill the 60 cc syringe with blood mixture by placing the tubing end of the syringe into the
pint bottle and drawing the mixture into the syringe.
(See figure 4.)
3.
The free end of the tubing goes through the hole on the outside of the adult I/O simulator.
(See figure 5.)
4.
Attach the free end of the tubing onto swivel end of the simulated bone.
(See figure 6.)
Use the supplied lubricant as needed to ease the tubing assembly onto the swivel end of
the simulated bone.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Actual product may vary slightly from photo. Nasco reserves the right to change product color,
materials, supplies, or function as needed.
4
SETUP
1.
To prepare blood mixture:
a.
Combine 11/4 cups of tap water with the artificial blood powder in the pint bottle pro-
vided. Add one full tube of lubricating jelly (measuring cup not included).
(See figures 1-3.)
b.
Shake vigorously for 30 seconds or until contents are mixed completely.
2.
Fill the 60 cc syringe with blood mixture by placing the tubing end of the syringe into the
pint bottle and drawing the mixture into the syringe.
(See figure 4.)
3.
The free end of the tubing goes through the hole on the outside of the adult I/O simulator.
(See figure 5.)
4.
Attach the free end of the tubing onto swivel end of the simulated bone.
(See figure 6.)
Use the supplied lubricant as needed to ease the tubing assembly onto the swivel end of
the simulated bone.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Actual product may vary slightly from photo. Nasco reserves the right to change product color,
materials, supplies, or function as needed.
HC190001INM5.indd 7-8
12/20/18 9:21 AM
4
SETUP
1.
To prepare blood mixture:
a.
Combine 11/4 cups of tap water with the artificial blood powder in the pint bottle pro-
vided. Add one full tube of lubricating jelly (measuring cup not included).
(See figures 1-3.)
b.
Shake vigorously for 30 seconds or until contents are mixed completely.
2.
Fill the 60 cc syringe with blood mixture by placing the tubing end of the syringe into the
pint bottle and drawing the mixture into the syringe.
(See figure 4.)
3.
The free end of the tubing goes through the hole on the outside of the adult I/O simulator.
(See figure 5.)
4.
Attach the free end of the tubing onto swivel end of the simulated bone.
(See figure 6.)
Use the supplied lubricant as needed to ease the tubing assembly onto the swivel end of
the simulated bone.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Actual product may vary slightly from photo. Nasco reserves the right to change product color,
materials, supplies, or function as needed.
4
SETUP
1.
To prepare blood mixture:
a.
Combine 11/4 cups of tap water with the artificial blood powder in the pint bottle pro-
vided. Add one full tube of lubricating jelly (measuring cup not included).
(See figures 1-3.)
b.
Shake vigorously for 30 seconds or until contents are mixed completely.
2.
Fill the 60 cc syringe with blood mixture by placing the tubing end of the syringe into the
pint bottle and drawing the mixture into the syringe.
(See figure 4.)
3.
The free end of the tubing goes through the hole on the outside of the adult I/O simulator.
(See figure 5.)
4.
Attach the free end of the tubing onto swivel end of the simulated bone.
(See figure 6.)
Use the supplied lubricant as needed to ease the tubing assembly onto the swivel end of
the simulated bone.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Actual product may vary slightly from photo. Nasco reserves the right to change product color,
materials, supplies, or function as needed.
HC190001INM5.indd 7-8
12/20/18 9:21 AM
