Instructions for Use
TO FILL WITH WATER:
NOTE ELECTRONIC MODELS:
make sure all electronics have been
disconnected prior to filling with water.
1. Hold manikin upside down.
2. Electronic models only: Place 2 red or clear caps (provided
with electronic models) into the white (pulse) and blue
(compression) ports of the manikin. The red (ventilation) port
has a permanently attached cap to use to close the port. This
is to prevent water from flowing into the internal components
of the manikin. Basic models only have one port on the left
foot.
3. Open the metal valve located at the bottom of the foot.
Timmy models open the aqua drain on the foot.
4. Attach faucet hose assembly (included with purchase) from
faucet to metal valve on the bottom of the left foot. Timmy model
attach the faucet hose assembly to aqua drain.
5. Fill with warm water.
6. Shut off the flow of water.
7. Remove faucet hose assembly from metal valve; Timmy model
remove faucet hose assembly from the aqua drain.
8. To remove air from the manikin gently squeeze until water
flows from the metal valve.
9. Hold and close the metal valve tightly.
TO DRAIN WATER FROM MANIKIN:
IMPORTANT Water must be drained every seven (7) days to prevent
microbiologic growth inside the manikin. Generally the manikin
should not be stored filled with water especially if stored in extreme
temperatures.
1. Place manikin’s feet into sink and open the metal valve; Timmy
models open metal valves and aqua drain.
2. Let drain 30 minutes or until all water has drained out.
3. Gently press chest of manikin repeatedly until water stops flowing.
4. Let drain additional 30 min. Electronic models, remove plugs
from color-coded ports.
5. Inflate with air for storage (all models).
6. After use: The manikin should be washed with warm, soapy
water, rinsed well, dried, and lightly dusted with baby powder.
3
