NASAB RW-91, Руководство по обслуживанию

Страница: 4 / 6

RW-91 – Service Manual
Hints:
- To get a perfect rewinded roll when printing batches of labels some points are
suggested
if possible. However the rewinder makes a good job without these proposals.
- In printers Setup use no “negative startadjust”. This will avoid retracting the
label before printing.
- Check also in the Setup with Normal speed if printer still stops for each label.
Hexagon grub screw Bobbin
Specification:
Bobbin length, 125mm
Label roll size, 38-180mm
Bobbin paper core size 38-42mm
Dimensions:
L 180mm
W 210mm
H 200mm
Weight 1.4kg
Power:
Supply the Rewinder from separate adapter either
18V/DC 15W, 800mA or 24V DC.
(2 pole female chassi plug, length 12mm, outer 5,5mm, inner 2.1mm)
Powering from printer is not recommended.