CONNECTING THE SUPERNOVA ANCHOR OR TRI-COLOUR.
Connect the power cable to the 12 volt supply (Red positive and
Black negative) through a 1 Amp fuse and a suitable switch. (Fig 5)
Fig. 5
RED
BLACK
+_
1 Amp Fuse
Switch
12 volt
Supply
CONNECTING THE COMBI LIGHT.
Connecting the red wire to positive and the black wire to negative will
illuminate the tricolour light. Reversing the connections will illuminate
the anchor light. A toggle switch is supplied with the combo light to
facilitate the supply reversal. (Fig 6) In the central position both lights
are off. Switching clockwise or anticlockwise selects the required
lighting configuration.
Fig. 6
+
_
1 Amp Fuse
12 volt
Supply
Light
Power
If a toggle or rocker switch is preferred, to match existing switches,
then a centre off two pole changeover switch can be use wired as in
fig 7.