NASA electric NS-9097, Руководство пользователя

Страница: 13 / 21

NS-9097
Vacuum cleaner
8
Vacuum cleaner park mode
• Holding clamp is used to hold the tube,
flexible tube and main brush when the vac -
uum cleaner is in the horizontal position. )as
shown in Figure 6-1(
• If you do not use the vacuum cleaner and
keep it standing, use the park mode. To
do this, insert the main brush hook into the
groove on the back of the device body and
press down to secure it in place. )as shown
in Figure 6-2(
Troubleshooting
Problem Possible cause Solution
• The device does not
turn on.
• The vacuum cleaner is off.
• The plug is not properly
connected to the electrical
outlet.
• There is a problem with the
power outlet.
• Connect the plug properly to the
electrical outlet.
• Turn on the device )turn the on / off
switch on.(
• Check the electrical outlet for electrical
connection and damage.
• Suction power
decreases over time.
• Suction power is low
or decreasing.
• The bag is full of dust.
• The main brush, hose and
telescopic tubes are blocked.
• The filter is clogged with dust.
• Empty the dust bag.
• Examine the main brush, hose and
telescopic tubes and remove any
blockages if they become clogged.
• Check the filter and replace or clean it if
necessary.
• The power cord
does not shrink.
• The power cable is out of the
winding path of the collection.
• Pull the power cord slightly outward and
retract it. )By pulling the plug or pushing
the retractor switch(
Clean and maintenance guide
1.
Always switch off the appliance and unplug
it before cleaning and storing the vacuum
cleaner.
2.
To increase the life of the device and more
useful operation, it is better to always keep
the device clean.
3.
After finishing the work, you can move or
hold the vacuum cleaner vertically. Simply
insert the hook attached to the main brush
into the groove under the body of the vacuum
cleaner and press down to secure it in place.
4.
Clean the body of the device, pipes and
other parts of the device with a damp cloth
and then dry. Do not use solvents, alcohol,
thinners, etc. to clean the body.
5.
After use, insert the peripherals of the de -
vice into its place.
6.
Before assembling the power cord, make
sure that the cord is not damaged and avoid
wetting the power cord. Make sure the power
cord is completely dry before assembling the
power cord.
7.
For better performance of the device, its lon -
ger life and use of after-sales service, use only
the accessories and main parts of the device.
• Obtain parts and accessories from autho -
rized NASA Electric dealerships or by visiting
www.nasaservice.com.
8.
Never use water to clean the hose, tele -
scopic tube and main brush. This can cause
6-1 6-2