NASA electric NS-626, Руководство пользователя

Страница: 16 / 21

5
Using a food processor guide
1.
Place the body of the appliance on a flat
surface and place the food processor con -
tainer on the body of the appliance and turn it
counterclockwise to hold it in place. )As shown
in figure 1(
2.
Place the Food processor coupling on the
shaft inside the container. )As shown in figure
2(
3.
Place the required grater disk on the grater
holder disk )with the arrow pointing inwards(
)the disk is sliding(, then place the grater hold -
er disk on the food container coupling. )As
shown in figure 3(
4.
Place the lid of the food processor contain -
er on the food processor and turn it counter -
clockwise to lock it in place )the cylindrical
part of the lid should be tangential to the food
processor handle(. )As shown in figure 4(
▪
The device is ready to use.
•
After installing the parts correctly, you can
use the device. If the food pieces are small,
put the pusher on the opening. Do not apply
too much pressure to the pusher to push food
into the mouth. It is best to cut large foods into
smaller pieces that fit the opening, then push
them into the container.
•
It is best to use a slow speed when chopping
soft foods to prevent them from being crushed.
•
The standard time to use the food processor
is 2 minutes.
•
The capacity of the food processor container
is 2 liters.
Using citrus juice guide
1.
Place the body of the appliance on a flat
surface and place the food processor con -
tainer on the body of the appliance and turn
it counterclockwise to hold it in place. )As
shown in figure 1(
2.
Place the food processor coupling on the
shaft inside the container. )As shown in figure 2(
3.
Place the citrus juicer on the coupling of
the food processor and turn it clockwise to
lock it. )As shown in figure 3(
4.
Place the citrus juice cone on the strainer.
)as shown in figure 4(
▪
The device is ready to use.
•
The standard time to use citrus juice is 2
minutes.
Using chopping and plastic blades guide
1.
Place the body of the appliance on a flat
surface and place the food processor con -
tainer on the body and turn it to the right
)counterclockwise( to hold it in place. )As
shown in figure 1(
2.
Insert the food processor coupling into the
container. )As shown in figure 2(
3.
Place the chopper or plastic blade on the
food processor cable. )As shown in figure 3(
•
You can first place the blade on the coupling
and fix it in place, then place the coupling with
the blade in the food processor container.
•
Chopper and plastic blades are placed in -
side the container with the help of a food pro -
cessor coupling.
4.
Pour the food into the container and dis -
tribute it evenly in the container.
5.
Place the lid of the food processor con -
1
3
2
4
1
3
4
2
5