NASA electric NS-3073, Руководство пользователя

Страница: 12 / 17

5
Device installation guide
1.
Before using for the first time, wash the
removable parts of the device with water and
detergent.
2.
Place the device on a flat, heat-resistant
surface )on a cabinet or table(.
3.
The device should be 10 cm away from the
wall, cabinets and other appliances, so that
there is enough space to open the door and
take out the cooking pot.
4.
Hold the lid on it through the handle and turn
it clockwise and remove the lid from the pres -
sure cooker. )as shown in figures 1-1,1-2(
5.
When opening and closing the pressure
cooker lid, pay attention to the markings on
the lid.
6.
Make sure the leaking washer and the in -
ner cover are in place correctly. Otherwise,
it is possible that the water in the cooking pot
will run out quickly and the food will burn or
not be cooked at all. )as shown in figure 1-3(
7.
Take the cooking pot out of the device and
pour the food and water into it. )as shown in
figure 1-4(
*
The volume of food in the cooking pot
should not be more than MAX line. Note that
the amount of ingredient after cooking should
not exceed the MAX line.
*
Use a plastic or wooden spoon and spatula
to stir and empty the food into the cooking
pot. To prevent scratches on the inner lining
of the cooking pot.
8.
Check that the safety valve and the steam
evacuate valve are in the correct position. )as
shown in figure 1-5(
*
Make sure that the steam evacuate valve
is completely closed, so that the steam inside
the housing has no way out.
*
If the internal pressure exceeds a certain
limit, the steam evacuate valve will move
upwards and the excess steam will escape
through the evacuate valves.
*
Be careful when steaming and avoid put -
ting your hands and face close to the lid of
the pressure cooker.
9.
Place the cooking pot in the inner hous -
ing. Before turning on the appliance, make
sure that the cooking pot with the element is
placed correctly.
*
Turn the cooking pot left and right, so that
it is in its specified place correctly.
*
Make sure that no object is placed be -
tween the cooking pot and the element. )as
shown in figure 1-6(
10.
Grasp the lid with the handle and turn it
counterclockwise until a tick is heard and the
lid is locked. )as shown in figure 1-7(
11.
Connect the socket of the power cable
to the socket and the plug to the socket. )as
shown in figure 1-8(
1-1
1-3
1-5
1-7
1-2
1-4
1-6
1-8