NASA electric NS-1963, Руководство пользователя, Страница: 9 / 13

NS-1963
Blender & Mill
4
23. Do not overfill the jar.
24. Always operate blender with cover in
place.
25. In the event of an abnormal noise or
severe vibration during operation, please
stop the device and take it to a NASA
Electric after-sales service department
for inspection. Never repair the device
yourself.
26. Do not place the appliance near or
on hot surfaces such as stoves, electric
heaters or hot ovens.
27. To reduce burns, it is best to allow the
device to cool after mixing hot liquids and
before removing and cleaning the parts.
Device parts & accessories
A Blender lid E Device body
B 6-blade shaft F Mixer arm
C Mixer shaft G Anti-shake base
D Blender jar H Mill
How to the install device parts
Warning: When installing and removing the
mixer container, do not touch the 6-blade
shaft as it is too sharp.
1. Place the body of the device on a flat
surface.
2. Place the mixer container on the body of
the device and turn it clockwise to lock it.
3. Place the mixer shaft or 6-blade shaft
)depending on need( on the shaft inside
the mixer container. Pour the food into
the mixing container.
4. Place the mixer lid on the mixer con-
tainer and turn it clockwise to lock and
activate the Micro switch.
5. The device is ready to use.
Tips on how to use the mixer
• The capacity of the mixer container is 1.7
liters.
Use 6-blade shaft
• Do not pour more than the maximum
level indicator into the mixer container.
• Mix the ingredients at the highest speed
for 1 minute.
• Allow the device motor and materials to
cool before proceeding with the next step.
• The mixer lid is equipped with a safe-
ty micro switch. )The mixer lid must be
locked in the direction of the arrow spec-
ified in the installation part of the device.(
Use the mixer shaft
• Do not pour more than the maximum
level indicator into the mixer container.
• Mix the ingredients at the highest speed
for 1 minute.
1 2 3 4
A
B
C
H
D
E
F
G