6. SAFETY RAIL
If needed, a safety rail can be built round the
sauna stove (Figure 9).
We recommend wood for this, in this
case, the minimum distances stated for
flamable constructions must absolutely
be followed. Incorrect installation can
cause a fire risk.
During the insulation resistance
measurement of the sauna heater, the heater
might leak. This is due to the dampness
that has seeped the insulator material
of the heating resistors during storing or
transportation. The resistors will be dry only after they have been warmed up a few
times. Do not switch the electrical sauna heater on using the fault current switch!
Min. 2 cm
Min. 2 cm
Min. 2 cm
Figure 9.
