Narita NH-9015TR, Инструкция по эксплуатации

Страница: 5 / 11

5
be lit up.
(FIGURE 3)
3. Power: Turn the Heater ON by pressing the Power button, the LED
display will show the current room temperature. The power is under
High, press again and the power is off. All indicator lights are turned
off except the power light. After powered off, the fan blade will still
work for 30 seconds. Please press on/off switch to “O” after fan
blade stops working. (See FIGURE 2 and FIGURE 3)
4. Mode: Pressing the “Mode” button once, the Power is Low, pressing
the “Mode” button twice, the heater turns into “AUTO” mode,
pressing “Mode” button a third time, the heater turns into “high”
mode.
5. To turn the Heater OFF, press the Power button again and turn off
power switch. (See FIGURE 1 or 2 & 3)
6. For additional safety, there is a TIP OVER SWITCH under the
bottom of the heater. When the heater falls down, the heater will
stop working. When put back up, press “POWER” button to rework
again. Check the heater to make sure it is not damaged before use.
Remark: When switching the heater off, the Fan of Heater will continue
to work around 30 seconds which helps to cool down the heater.
OSCILLATION FUNCTION: This function will work in any mode.
Pressing the “OSC” button will allow the Heater to oscillate side by side.
To stop the oscillation, press the “OSC” button once more.
TIMER FUNCTION: The timer function allows you to set the length of
operation from 0.5 hour to 7.5 hours. Keep pressing Timer button to
increase hours.