NARGESA MC150B, Инструкция

Страница: 19 / 29

MC150B BENDING MACHINE INSTRUCTION BOOK 18
8. OPTIONAL ACCESSORIES
The bending machine has been designed for bending all kinds of profiles irrespective of their shape.
The standard rolls included as standard on the bending machine allow the configuration of all kinds of
handrails, angles, square, round pipes, etc., thanks to their multiple configurations.
In order to facilitate the bending of certain more delicate materials that require a very good surface finish
or to facilitate the bending of more common sections, NARGESA has designed a series of rollers that can
be purchased at an official dealership or by directly by contacting NARGESA S.L.
Besides the accessories shown below, NARGESA also designs special rollers upon specific request for
customers
.
Set of 3 tempered steel rollers for round steel or stainless steel tubes with a thickness
1" GAS = 33,250 mm 1" WHITWORT = 25,401mm
When pipe sizes are small, two sizes are included in the same roller.
Eg. (20+35) or (1/2"+1"1/4)
It is advisable to clean up very well the rollers before using stainless Steel to
prevent from contaminating the pipe.
Set of 3 Sustarin rollers for stainless steel, aluminium tubes and delicate materials with a thickness
less than 2.5 mm.
1" GAS = 33,250 mm 1" WHITWORT = 25,401mm
Weight: 2,5 Kg
When pipe sizes are smaller, two sizes are included in the same roller.
Eg. (20+35) or (1/2"+1"1/4)
Susterin rollers do not spoil or contaminate the pipe.
For any other size or profile please ask the manufacturer.
For pipe in mm.
(25+30) - (20+35) - 33 - 40 - 43 - 50 - 50,8 - 60
For pipe
in mm Weight ISO in mm Weight Whitwort inches Weight
(30+25) 17,00 Kg (26,9+21,3) 17,70 Kg (1/2”+1”1/4”) = (12,700 + 31,751 mm) 18,00 Kg
(35+20) 16,50 Kg (33,7+17,2) 17,00 Kg (1”+3/4”) = (25,401 + 19,051 mm) 18,50 Kg
40 16,60 Kg 42,4 16,00 Kg 1”1/2 = 38,101 mm 17,25 Kg
50 14,25 Kg 48,3 14,40 Kg 2” = 50,802 mm 13,60 Kg
60 11,10 Kg 60,3 11,15 Kg 2”1/2 = 63,502 mm 9,75 Kg
70 76,1 3”=76,2 mm