INSTALLATION
GB
CONTENTS
GB
Installation
■
Positioning
■
Cleaning the interior
■
Instructions for totally built-in
appliances
■
Electrical connection
Technical specification
Use
■
Operation
■
Temperature regulation
■
Freezing fresh food
■
Storage of frozen food
■
Thawing
■
Fresh food refrigeration
■
Defrosting
Maintenance
■
Periodic cleaning
■
Periods of non use
■
Replacing the interior light bulb
Defective operation
12
12
12
13
15
15
16
16
16
16
16
17
17
18
19
19
19
19
19
12
If this appliance featuring magnetic door
seals is to replace an older appliance
having a spring lock (latch) on the door or
lid, be sure to make that spring lock
unusable before you discard the old
appliance. This will prevent it from
becoming a death-trap for a child.
Positioning
The appliance should be installed well away
from sources of heat such as radiators,
boilers, direct sunlight etc. Best performance
is obtained with ambient temperature
b18°C and +43°C (class T); +18°C
and +38°C (class ST); +16°C and +32°C
(class N); +10°C and +32°C (class SN). The
class of your appliance is shown on its
rating plate.
For building into kitchen units follow the
special “ Building-in” instructions given.
Important
It is essential that the appliance be
connected to an efficient earth tap. For this
purpose the supply cable plug incorporates a
special earth contact. If the sockets of your
domestic wiring system are not earthed,
have the appliance connected to a separate
earth wire by a qualified electrician in
accordance with existing safety regulations.
The Manufacturer declines all
responsibility if the above safety
precautions are not observed.
This appliance complies with EEC
directive number 87/308 of 2/6/87 relative
to radio interference suppression.
This appliance complies with the
following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage
Directive) and subsequent mod)fications;
- 89/336 EEC of 3.5.89 (Electromagnetic
Compatibility Directive) and subsequent
modifications.
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap
so as to remove the typical smell of a brand-
new product, then dry thoroughly. Do not use
detergents or abrasive powders, as these will
damage the finish.
